Powermatic 701 Uživatelský manuál Strana 1

Operating Instructions and Parts Manual Deluxe Bench-top Mortiser Model: 701 WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVer

10Installing Chisel and Auger Referring to Figure 6: 1. Open door (A). 2. Swing two bushing spacers (B) away from the head (C). 3. Loosen the lock sc

11Securing Mortiser to Work Bench It is highly recommended to secure the mortiser to the workbench to prevent the possibility of tipping, sliding or

12Grounding Instructions This machine must be grounded while in use to protect the user from shock In the event of a malfunction or breakdown, groun

13Chisel Parallel to Workpiece Referring to Figure 12: The chisel can be adjusted parallel to the workpiece as follows: 1. Loosen the two clamps (A)

14Fence and Clamp Referring to Figure 13: The 701 Mortiser is equipped with a forward/backward movement adjustable fence (B) and hold-down clamp (F,

15Operation 1. Set the depth stop to the required depth of cut (refer to the Depth Stop Adjustment section on page 12). 2. Place workpiece on table

16Maintenance Before any intervention on the machine, disconnect it from the electrical supply by pulling out the plug or switching off the main swi

17Parts List Index No. Part No. Description Size Qty 1 ... 701-101 ...Base ...

18Index No. Part No. Description Size Qty 56 ... 701-156 ...Head ...

19Assembly Drawing Patent No. 7,509,984

2Warranty and Service Walter Meier (Manufacturing) Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Aut

20Wiring Diagram 115V230V Optional Accessories Optional accessories can be purchased by calling the service department at the number below. 1791311

3Table of Contents Warranty and Service ...

4 Warnings 1. Read and understand the entire owner's manual before attempting assembly or operation. 2. Read and understand the warnings poste

5 21. Make your workshop child proof with padlocks, master switches or by removing starter keys. 22. Give your work undivided attention. Looking aro

6Introduction This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and maintenance procedures for a Model 701 De

Unpacking Remove contents from the shipping carton. Check for damage and ensure all parts are intact. Any damage should be reported immediately to you

8Operating Handle Referring to Figure 2: The operating handle can be mounted on either the left- or right-hand side of the mortiser. The handle hub

9Overview – Chuck Extension Do you need it The 701 Mortiser comes with the chuck already assembled at the factory, intended to be used with augers ha